TECNO CAMON X (CA7) SPECIFICATIONS
Display.
- Dimension: 158.6 x 75.8 x 5.2mm.
- Screen size: 6.0-inch IPS with curved 2.5D Glass.
- Screen Resolution: 720 x 1440 pixels (HD+).
- Pixel Density: 368 PPI.
- Body: Polycarbonate Plastic.
Network.
- 2G: Yes.
- 3G: Yes.
- 4G: Yes.
- SIM Type: Dual Nano SIM.
Operating System & Processor.
- Android version: HiOS 3.3 Based on Android 8.1 Orea.
- Processor Type: 64-bit Mediatek Helio P23 MT6763T.
- Processor Speed: 2.0GHz Octa-Core.
- Graphics Processor: Mali G71 MP2.
Camera.
- Rear Camera: 16MP with ring flash.
- Video Recording: 1080p@30fps.
- Front Camera: 20MP with dual flash.
- Features: Auto-Focus, digital zoom, face detection, panorama, super pixel, portrait.
Memory.
- RAM: 3GB.
- Internal Storage Memory: 16GB.
- SD card Slot: Yes, support up to 128GB.
Battery.
- 3750 mAh Li-Po.
Sensors.
- Accelerometer, Proximity, Compass, Light, Fingerprint, Gyroscope, Face ID.
Connectivity.
- Bluetooth: v4.2.
- USB: micro USB, OTG support.
- GPS: A-GPS.
- Wi-Fi: WI Fi 802.11 b/g/n, Wi-Fi direct, hotspot.
Multimedia.
- Audio/Music Support: MP3, EAAC, WMA, WAV.
- Loudspeaker: Yes.
- Video Support: MMV, MP4, H.263, H.264.
- FM Radio: Yes.
Colors.
- Black, Blue, Grey.
How To Flash Tecno Camon X (CA7) Factory Firmware With Sp Flash tool.
REQUIREMENT'S;
- A working detectable USB Cord.
- A Windows PC.
- A Good Battery up to 75%
- Download the Factory Firmware From link bellow on your personal computer.
- Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
- Download and Launch the Smart Phone Flash Tool(Sp Flash tool) or other tool like Nckdongle or Cm2 etc
- Load Da (Download Agent) file if the phone is secure boot
- Click the Scatter-loading button on Sp flash tool to navigate to the stock Rom you just downloaded on your Pc or Use other tool as instructed by tool.
- Select the Scatter File from the extracted Stock Firmware on your computer.
- Select the Download Only in the SP flash tool, this will reduce risk of killing the phone
- Click the Download button to start the Flashing process.
- Connect your device via USB to the computer, flashing process will starting working
- Patiently wait for your device to complete flashing.
- After the Flashing process is done, a Big Green button will pop up on the SP Flash to show that flashing process is complete successfully.
- Unplug your device, remove battery if removable otherwise wait for a second then power on.
- If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
- Flashing process completely successfully enjoy!
How To Flash Tecno Camon X (CA7) Factory Firmware With after sales Download flash tool (SWD),
- Download Factory Firmware From link bellow on your personal computer.
- Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
- Download and Launch Tecno after sales flash tool
- Click on settings icon to load scatter file
- Choose Download only to preserve user Data if you want otherwise use other options but not Format all and download
- Click on Play button after scatter file loading
- Checksum will verify all files wait till it complete
- Connect your device via Usb to start Flashing proccess
- Flashing process begins wait until process complete don't unplug your device,by doing that your phone will be killed.
- Green text will appear, this will shows that flashing process completely successfully
- Now Enjoy!
REMEMBER;
1.To backup Nvram if posible
2. User data or Personal Data
3.Security Items
4.Etc
ADVANTAGES OF FLASHING TECNO CAMMON X (CA7) WITH THIS FACTORY FIRMWARE.
- Fix dead boot on devices due to wrong firmware flashed initially
- Fix/Repair IMEI on your device using the DB files in the factory firmware
- Remove Monkey Virus/other malware
- Fix hang on logo, rebooting or restarting
- Restore devices to their factory state
- Completely un-root your device
- Fix unfortunately, app has stopped
- Fix network related issues
- LCD Display issues
- Remove Frp (Factory Reset Protection)
Posts
No comments:
Post a Comment