TECNO F3PRO FACTORY FIRMWARE TESTED AND WORK 100%, REMOVE FRP

TECNO F3PRO SPECIFICATIONS:

.*. Display: 
          5.5-inch FWVGA IPS capacitive touchscreen
*. Screen resolution: 
         960 x 480 pixels
*. Colors: 
          Champagne Gold, Elegant Black, Red
*. Dimension: 
          151.5 x 71.9 x 8.5 mm
*. Processor: 
          MediaTek 1.3GHz Quad-core
*. RAM: 
          1GB
*. Camera:
        Back Camera: 13MP with dual-LED flashlights
        Front Camera: 5MP front camera with LED flashlight
*. OS: 
        Android 7.0 Nougat
*. Internal storage: 
        16GB expandable up to 32GB via Micro SD card slot
*. Network and Connectivity: 
        Wi-Fi, Wi-Fi Hotspot, Bluetooth v4.2, USB type 2.0,              3.5mm Audio Jack, 2G, 3G, Dual SIM Support
*. Sensors: 
        Accelerometer, Proximity, Ambient light, Gyroscope
*. Battery: 
        2400mAh battery

 
 How To Flash Tecno F3Pro (POP 1 PRO) Factory Firmware With Sp Flash tool.

REQUIREMENT'S;

• A working detectable USB Cord.
• A Windows PC.
• A Good Battery up to 75%

   STEP'S TO FOLLOW'S;

• Download the Factory  Firmware From link bellow on your personal computer.
• Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
• Download and Launch the Smart Phone Flash Tool(Sp Flash tool) or other tool like Nckdongle or Cm2 etc

•  Load Da (Download Agent) file if the phone is secure boot

• Click the Scatter-loading button on Sp flash tool to navigate to the stock Rom you just downloaded on your Pc or Use other tool as instructed by tool.

• Select the Scatter File from the extracted Stock Firmware on your computer.
• Select the Download Only in the SP flash tool, this will reduce risk of killing the phone
• Click the Download button to start the Flashing process.

• Connect your device via USB to the computer, flashing process will starting working
• Patiently wait for your device to complete flashing.
• After the Flashing process  is done, a Big Green button will pop up on the SP Flash to show that flashing process is complete successfully.

• Unplug your device, remove battery if removable otherwise wait for a second then power on.
• If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
• Flashing process completely  successfully enjoy!

How To Flash Tecno F3Pro (POP 1 PRO) Factory Firmware With  after sales Download flash tool (SWD),

• Download Factory  Firmware From link bellow on your personal computer.
• Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
• Download and Launch Tecno after sales flash tool

• Click on settings icon to load scatter file

• Choose Download only to preserve user Data if you want otherwise use other options but not Format all and download
• Click on Play button after scatter file loading

• Checksum will  verify all files  wait till it complete

• Connect your device via Usb to start Flashing proccess
• Flashing process begins wait until process complete don't unplug your device,by doing that your phone will be killed.

• Green text will appear, this will shows that flashing process completely   successfully 

• Now Enjoy!

REMEMBER;

      1.To backup Nvram if posible
      2. User data or Personal Data 
      3.Security Items 

ADVANTAGES OF FLASHING TECNO F3Pro (POP 1 PRO) WITH THIS  FACTORY  FIRMWARE. 

•     Fix dead boot on devices due to wrong firmware flashed initially
•     Fix/Repair IMEI on your device using the DB files in the  factory firmware
•     Remove Monkey Virus/other malware
•     Fix hang on logo, rebooting or restarting
•     Restore devices to their factory state
•     Completely un-root your device
•     Fix unfortunately, app has stopped
•     Fix network related issues
•     LCD Display issues
•     Remove Frp (Factory Reset Protection)