TECNO LA7PRO SPECIFICATION'S;
LAUNCH
・Announced: May, 2018
・Status: Available. May, 2018
NETWORK
・Network Technology: GSM / WCDMA / LTE
・3G Support: 850/1700/1900/2100
・4G Support: LTE
・Number of SIM Card: 2 (Nano)
・Dual SIM Support: Yes
DESIGN
・Material Type: Metal frame
・Dimensions: 159.8 x 76.8 x 8.5 mm
・Colour: City Blue, Midnight Black, Champagne Gold
・Weight: –
DISPLAY
・Screen Type: HD+ IPS LCD capacitive touchscreen
・Size: 6-inch
・Resolution: 720 x 1440 pixels
・Pixel Density: 269ppi
・Screen to Body Ratio: 76.3%
SOFTWARE
・Operating system: Android 8.1 Oreo
・Processor: Quad-core 1.5GHz
・Chipset type: MediaTek MT
・Graphics Processing Unit: IMG PowerVR GE8100 up to 570MHz
STORAGE
・Memory Card slot: Yes, up to 128GB
・Internal storage: 16GB
・RAM: 3GB
CAMERA
・Back Camera: 13MP
・Front Camera: 13MP
・Back Flash: Yes, dual-LED
・Front Flash: Yes
FEATURES
・Wifi Hotspot: Yes
・Bluetooth: Yes
・Fingerprint Sensor: (Rear)
・Sensors: accelerometer, proximity, ambient light, gyroscope
・USB: Yes
・GPS: Yes
・3.5mm Audio Jack: Yes
BATTERY
・Capacity: 5000mAh
・Type: Li-Ion
・Standby Time: –
・Talktime: –
・Fast Charging: No
How To Flash Tecno LA7Pro Factory Firmware With Sp Flash tool
REQUIREMENT'S;
- A working detectable USB Cord.
- A Windows PC.
- A Good Battery up to 75%
- Download the Factory Firmware From link bellow on your personal computer.
- Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
- Download and Launch the Smart Phone Flash Tool(Sp Flash tool) or other tool like Nckdongle or Cm2 etc
- Load Da (Download Agent) file if the phone is secure boot
- Click the Scatter-loading button on Sp flash tool to navigate to the stock Rom you just downloaded on your Pc or Use other tool as instructed by tool.
- Select the Scatter File from the extracted Stock Firmware on your computer.
- Select the Download Only in the SP flash tool, this will reduce risk of killing the phone
- Click the Download button to start the Flashing process.
- Connect your device via USB to the computer, flashing process will starting working
- Patiently wait for your device to complete flashing.
- After the Flashing process is done, a Big Green button will pop up on the SP Flash to show that flashing process is complete successfully.
- Unplug your device, remove battery if removable otherwise wait for a second then power on.
- If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
- Flashing process completely successfully enjoy!
How To Flash Tecno LA7Pro Factory Firmware With after sales Download flash tool (SWD),
- Download Factory Firmware From link bellow on your personal computer.
- Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
- Download and Launch Tecno after sales flash tool
- Click on settings icon to load scatter file
- Choose Download only to preserve user Data if you want otherwise use other options but not Format all and download
- Click on Play button after scatter file loading
- Checksum will verify all files wait till it complete
- Connect your device via Usb to start Flashing proccess
- Flashing process begins wait until process complete don't unplug your device,by doing that your phone will be killed.
- Green text will appear, this will shows that flashing process completely successfully
- Now Enjoy!
REMEMBER;
1.To backup Nvram if posible
2. User data or Personal Data
3.Security Items
4.Even Firmware for late reference if any damage happened
ADVANTAGES OF FLASHING TECNO LA7PRO WITH THIS FACTORY FIRMWARE
- Fix dead boot on devices due to wrong firmware flashed initially
- Fix/Repair IMEI on your device using the DB files in the factory firmware
- Remove Monkey Virus/other malware
- Fix hang on logo, rebooting or restarting
- Restore devices to their factory state
- Completely un-root your device
- Fix unfortunately, app has stopped
- Fix network related issues
- LCD Display issues
- Remove Frp (Factory Reset Protection)
Posts
No comments:
Post a Comment