TECNO POP 2 B1 FACTORY SIGNED FIRMWARE TESTED AND WORK 100%

B1-F8018BC-GO-181117V124 

TECNO POP 2(B1) FEATURES

• OS: Android 8.1 (GO edition)
• SIM Type: Dual sim (Micro)
• 4G LTE: No
• Screen Size : 5.5 FULLVIEW touchscreen
• Screen Resolution: 960 X 480 pixels
• Processor Type: Quad-core 1.30 GHz, MediaTek MT6580A
• RAM: 1GB
• Internal Storage: 8GB
• External Storage: microSD, up to 32GB
• Back / Rear Camera: 5MP camera & LED Flash
• Front Camera: 8MP with LED flash
• Battery: 2400 mAh (non-removable) 

 

How To Flash Tecno POP 2 B1  Factory Firmware With Sp Flash tool

• Download the Factory  Firmware From link bellow on your personal computer.
• Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
• Download and Launch the Smart Phone Flash Tool(Sp Flash tool) or other tool like Nckdongle or Cm2 etc

•  Load Da (Download Agent) file if the phone is secure boot

• Click the Scatter-loading button on Sp flash tool to navigate to the stock Rom you just downloaded on your Pc or Use other tool as instructed by tool.

• Select the Scatter File from the extracted Stock Firmware on your computer.
• Select the Download Only in the SP flash tool, this will reduce risk of killing the phone
• Click the Download button to start the Flashing process.

• Connect your device via USB to the computer, flashing process will starting working
• Patiently wait for your device to complete flashing.
• After the Flashing process  is done, a Big Green button will pop up on the SP Flash to show that flashing process is complete successfully.

• Unplug your device, remove battery if removable otherwise wait for a second then power on.
• If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
• Flashing process completely  successfully enjoy!

How To Flash Tecno POP 2 B1 Factory Firmware With Tecno after sales Download flash tool (SWD),

• Download Factory  Firmware From link bellow on your personal computer.
• Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
• Download and Launch Tecno after sales flash tool

• Click on settings icon to load scatter file

• Choose Download only to preserve user Data if you want otherwise use other options but not Format all and download
• Click on Play button after scatter file loading

• Checksum will  verify all files  wait till it complete

• Connect your device via Usb to start Flashing proccess
• Flashing process begins wait until process complete don't unplug your device,by doing that your phone will be killed.

• Green text will appear, this will shows that flashing process completely   successfully 

• Now Enjoy!