TECNO F2 LITE FACTORY FIRMWARE

SPECIFICATION OF TECNO F2 LTE

LAUNCH
・Announced: June, 2018
・Status: Available. June, 2018

NETWORK
・Network Technology: GSM / WCDMA / LTE
・3G Support: 850/1700/1900/2100
・4G Support: LTE: B1/B3/B7/B20 TDD
・Number of SIM Card: 2 (Nano)
・Dual SIM Support: Yes

DESIGN
・Material Type: Plastic
・Dimensions: 143.8 x 73.94 x 9.55 mm
・Colour: Black, Gold, Blue
・Weight: –

DISPLAY
・Screen Type: FWVGA IPS capacitive touchscreen
・Size: 6-inch
・Resolution: 854 x 480 pixels
・Pixel Density: –
・Screen to Body Ratio: –

SOFTWARE
・Operating system: Android 8.1 Go
・Processor: Quad-core 1.3GHz
・Chipset type: MediaTek
・Graphics Processing Unit: Mali

STORAGE
・Memory Card slot: Yes, up to 32GB
・Internal storage: 8GB
・RAM: 1GB

CAMERA
・Back Camera: 5MP
・Front Camera: 5MP
・Back Flash: Yes, dual-LED
・Front Flash: Yes

FEATURES
・Wifi Hotspot: Yes
・Bluetooth: Yes
・Fingerprint Sensor: Yes (Rear)
・Sensors: accelerometer, proximity, ambient light, gyroscope
・USB: Yes
・GPS: Yes
・3.5mm Audio Jack: Yes

BATTERY
・Capacity: 2400mAh
・Type: Li-Ion
・Standby Time: –
・Talktime: –
・Fast Charging: No

How To Flash Tecno KA70 Factory Firmware With Sp Flash tool

• Download the Factory  Firmware From link bellow on your personal computer.
• Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
• Download and Launch the Smart Phone Flash Tool(Sp Flash tool) or other tool like Nckdongle or Cm2 etc

•  Load Da (Download Agent) file if the phone is secure boot

• Click the Scatter-loading button on Sp flash tool to navigate to the stock Rom you just downloaded on your Pc or Use other tool as instructed by tool.

• Select the Scatter File from the extracted Stock Firmware on your computer.
• Select the Download Only in the SP flash tool, this will reduce risk of killing the phone
• Click the Download button to start the Flashing process.

• Connect your device via USB to the computer, flashing process will starting working
• Patiently wait for your device to complete flashing.
• After the Flashing process  is done, a Big Green button will pop up on the SP Flash to show that flashing process is complete successfully.

• Unplug your device, remove battery if removable otherwise wait for a second then power on.
• If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
• Flashing process completely  successfully enjoy!

How To Flash Tecno F2LITE Factory Firmware With Tecno after sales Download flash tool (SWD),

• Download Factory  Firmware From link bellow on your personal computer.
• Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
• Download and Launch Tecno after sales flash tool

• Click on settings icon to load scatter file

• Choose Download only to preserve user Data if you want otherwise use other options but not Format all and download
• Click on Play button after scatter file loading

• Checksum will  verify all files  wait till it complete

• Connect your device via Usb to start Flashing proccess
• Flashing process begins wait until process complete don't unplug your device,by doing that your phone will be killed.

• Green text will appear, this will shows that flashing process completely   successfully 

• Now Enjoy!

ADVANTAGES OF TECNO F2 LITE FACTORY FIRMWARE

• UNLOCK NETWORK
• SOLVE API 3 ERROR
• SOLVE HANG ON LOGO PROBLEM
• REMOVES VARIOUS VIRUS LIKE MONKEY 
• UNFORTUNATE PROBLEM
• IMPROVE SPEED OF PHONE